|
Product Model
|
[ ESR-208 ]
|
[+] Enlarge image |
ISO View | Top View | Open View
Front View | Rear View |
Summary
The ESR-208 is a EIA310-D standard 2U chassis design that balances what is possible and what is needed. It
supports most form factor server boards in the market from Single Pentium 4 or AMD Athlon, Dual AMD Opteron, and Dual Clovertown/Penryn Server Boards in a high density and cost-effective enclosure. The ESR-208 storage server chassis deliver technology that differentiates your company by helping you to create integrated
competitive solutions that win.
Features and Benefits
- Supports SSI EEB 3.5, CEB 1.1 or AMD Dual Opteron compliant server boards
- Power MOSFET and pre-charge circuit for surge current protection on hard drive and backplane
- Horizontal backplane design to allow maximum airflow for system cooling
- Included SGS approved slide rails
- 3 years warranty on power supply
- Other High Quality Components are backed by a lifetime warranty
|
|
| Specification |
| Dimensions |
3.5"(H) x 19"(W) x 28"(D) |
| Front Access Connector |
2 X USB ports, 1 X DB9 port |
| Front Access switch |
Power On/Off, Reset, Alarm Reset |
| Front Panel Indicators |
Power On, HDD Activity, PSU failure, Fan failure, Overheat warning, LANs |
| Hot swap drive indicators |
Power On, HDD Activity, HDD failure |
| Power Supply |
500W 2+1 Hot-swap redundant power supply |
| Power Supply Options |
up to 900W Fixed, Redundant, high efficiency 80+ |
| System Board |
Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant |
| Drive Bay |
Internal slim FDD x 1 |
Internal slim CD x 1 |
Internal slim 2.5" x 1 ( 3 maximum ) |
Hotswap Bay x 8 |
|
| Data Backplane |
| Serial ATA PTP |
| Serial ATA Multilane |
| Ultra 320 SCA |
| Serial Attached SCSI |
|
| Included Data cable |
Yes
|
| Included slide rail |
Yes
|
| System Monitoring |
Fan / over heat / power supply fault detection |
| Thermal |
Intel Validated Pass Xeon 3.73Ghz 1066Mhz |
| SATA backplane Specification |
1. A power MOSFET to provide disk spin-up control
2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure
4. A 4x2 header for Drive activity and Drive failure LED signal input
5. Single DC input to provide better cable management
6. Option for SATA PTP. SAS, multilane and miniSAS
7. Option support SAS expander |
| SCSI backplane Specification |
1. A power MOSFET to provide disk spin-up control
2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure
4. A 4x2 header for Drive activity and Drive failure LED signal input
5. Single DC input to provide better cable management
6. Piano Switch for easy SCSI ID setting
7. Two HD68 SCSI connectors for daisy chain if required |
|
|
All package are for US and Canada only , visit support page for other counties.
|
|
|
TERMS | PRIVACY | SITE MAP
© Copyright 2005, TST Corp. All rights reserved
|
|
|
